Flex-I-Liner pumps are sealless and self-priming

On-Line OrderingFlex-I-Liner pumps are sealless and self-priming. They can pump in either direction and can run dry. Flex-I-Liner pumps can be furnished with electric motors, with rotary vane air motors or with variable speed drives for metering purposes.
  

Request Our Catalog!
Engineered to handle:
bullet Corrosive Chemicals
bullet Abrasive Slurries
bullet Pharmaceuticals
bullet Foodstuffs
bullet Liquids with entrained gases
bullet Viscous Fluids up to 20% of soft solids
bullet Ultrapure Chemicals
bullet Shear Sensitive Liquids

Also ideal for OEM Applications

 Flex-I-Liner pumps are sealless and self-priming
       
Specifications:
bullet Flows from .33 gpm to 10 gpm (1.26 l/m  to 2.25 m³/hr)
bullet Pressures to 45 psig (310 kPa)
bullet Temperatures to 210° F (99° C)

Note:
Consult factory for flows greater than 10gpm (2.25m³/hr and temperatures higher than 210° F (99° C)

Providing a gentle, pumping action that eliminates churning or foaming, the pump moves fluid without having it come in contact with any metallic parts. The pump’s operation is based on the fluid traveling between the interior wall of a rugged themoplastic body block and the outer wall of a flexible, elastomeric liner. A rotor mounted on an eccentric shaft rotates within the flexible liner creating a squeegee action on the fluid, thereby forcing it in the desired direction.

Flex-I-Liner pumps are sealless and self-priming

On-Line Ordering

   

            
Vanton Pump & Equipment Corp • 201 Sweetland Ave • Hillside, NJ 07205
Phone: (908) 688-4216 • Fax: (908) 686-9314 • Email: mkt@vanton.com

Vanton

VantonTo find out about our complete line of thermoplastic pumps for
handling corrosive, abrasive, hazardous and ultra pure fluids.